View XC6201132PB_4477494.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

1/24 xc6201 series positive voltage regulators ? ? ? ?? general description the xc6201 series are highly precise, low power consumption, positive voltage regulators manufactured using cmos and laser trimming technologies. the series provides large currents with a significantly small dropout voltage. the xc6201 consists of a current limiter circuit, a driver tran sistor, a precision reference voltage and an error amplifier. ou tput voltage is selectable in 100mv steps between 1.3v ~ 6. 0v. sot-25 (250mw), sot-89 (500mw), usp-6b (100mw) and to-92 (300mw) packages are available. a pplications ? mobile phones ? cordless phones, wireless communication equipment ? cameras, video recorders ? portable games ? portable av equipment ? reference voltage ? battery powered equipment typical application circuit features maximum output current : 250ma (typ.) dropout voltage : 0.16v @ 100ma : 0.40v @ 200ma maximum operating voltage : 10v output voltage range : 1.3v ~ 6.0v (selectable in 100mv increments) highly accurate : fixed voltage accuracy ? 1% (+ 1% @v out(t) > 2.0v) : ? 2% low power consumption : 2.0 a (typ.) operational temperature range : -40 ? ~ 85 ? ultra small packages : sot-25 (250mw), sot-89 (500mw), to-92 (300mw), usp-6b (100mw) tantalum or ceramic capacitor compatible typical performance characteristics xc6201p332 etr0301_001 ? supply current vs. input voltage
2/24 xc6201 series ? ? ? ? ? ? ? ? pin number sot-25 sot-89/to-92 (t) to-92 (l) usp-6b pin name function 5 1 2 3 v out output 2 2 1 5 v ss ground 1 3 3 1 v in power input 3, 4 2,4,6 nc no connection designator description symbol description ? product number 01 : - ? type of regulator p : 3-pin regulator ?? output voltage 13 ? 60 : e.g. 30:3.0v 50:5.0v 1 : ? 1% ? output voltage accuracy 2 : ? 2% m : sot-25 p : sot-89 t : to-92 (standard) l : to-92 (custom pin configuration) ? packages d : usp-6b r : embossed tape, standard feed l : embossed tape, reverse feed h : paper type (to-92) ? device orientation b : bag (to-92) pin configuration pin assignment product classification ? ordering information x c 6 2 0 1 p ????? ? ? *the dissipation pad for the usp-6b package should be solder-plated in recommended mount pattern and metal masking so as to enhance mounting strength and heat release. if the pad needs to be connected to other pins, it should be connected to the v ss (no.5) pin. nc vss nc vin nc vout * + 1% accuracy can be set at v out(t) > 2.0v.
3/24 xc6201 series parameter symbol ratings units input voltage v in 12.0 v output current i out 500 ma output voltage v out v ss -0.3 ? v in +0.3 v sot-25 250 sot-89 500 to-92 300 power dissipation usp-6b pd 100 mw operating temperat ure range topr -40 ? +85 ? storage temperature range tstg -55 ? +125 ? parameter symbol conditions min. typ. max. units circuit output voltage v out(e) ( ? 2) v in =2.3v i out =10ma 1.274 1.300 1.326 v ? maximum output current i outmax v in =2.3v v out(e) ? 1.17v 60 - - ma ? load regulation v out v in =2.3v 1ma ? i out ? 30ma - 10 30 mv ? vdif1 i out =30ma - 200 600 dropout voltage ( ? 3) vdif2 i out =60ma - 500 810 mv ? supply current i ss v in =2.3v - 2.0 5.0 a ? line regulation v out v in k v out i out =10ma 2.3v ? v in ? 10.0v - 0.2 0.3 ? /v ? input voltage v in 1.8 - 10 v - v out output voltage temperature characteristics topr k v out i out =40ma -40 ? ? topr ? 85 ? - ? 100 - ppm/ ? ? a bsolute maximum ratings ta = 2 5 ? electrical characteristics xc6201p132 v out(t)= 1.3v ? ( ? 1) ta = 2 5 ? block diagram
4/24 xc6201 series parameter symbol conditions min. typ. max. units circuit output voltage v out(e) ( ? 2) v in =2.8v i out =40ma 1.764 1.800 1.836 v ? maximum output current i outmax v in =2.8v v out(e) ? 1.62v 80 - - ma ? load regulation v out v in =2.8v 1ma ? i out ? 40ma - 10 30 mv ? vdif1 i out =40ma - 200 370 dropout voltage ( ? 3) vdif2 i out =80ma - 450 710 mv ? supply current i ss v in =2.8v - 2.0 5.0 a ? line regulation v out v in k v out i out =40ma 2.8v ? v in ? 10.0v - 0.2 0.3 %/v ? input voltage v in 1.8 - 10 v - output voltage temperature characteristics v out topr k v out i out =40ma -40 ? ? topr ? 85 ? - ? 100 - ppm/ ? ? parameter symbol conditions min. typ. max. units circuit output voltage v out(e) ( ? 2) v in =3.7v i out =40ma 2.646 2.700 2.754 v ? maximum output current i outmax v in =3.7v v out(e) ? 2.43v 100 - - ma ? load regulation v out v in =3.7v 1ma ? i out ? 60ma - 15 40 mv ? vdif1 i out =60ma - 200 370 dropout voltage ( ? 3) vdif2 i out =120ma - 450 710 mv ? supply current i ss v in =3.7v - 2.0 5.0 a ? line regulation v out v in k v out i out =40ma 3.7v ? v in ? 10.0v - 0.2 0.3 ? /v ? input voltage v in 1.8 - 10 v - output voltage temperature characteristics v out topr k v out i out =40ma -40 ? ? topr ? 85 ? - ? 100 - ppm/ ? ? xc6201p182 v out(t)= 1.8v ( ? 1) ta = 2 5 ? xc6201p272 v out(t)= 2.7v ( ? 1) ta = 2 5 ? electrical characteristics (continued)
5/24 xc6201 series parameter symbol conditions min. typ. max. units circuit output voltage v out(e) ( ? 2) v in =4.3v i out =40ma 3.234 3.300 3.366 v ? maximum output current i outmax v in =4.3v v out(e) ? 2.97v 150 - - ma ? load regulation v out v in =4.3v 1ma ? i out ? 80ma - 20 50 mv ? vdif1 i out =80ma - 200 360 dropout voltage ( ? 3) vdif2 i out =160ma - 450 700 mv ? supply current i ss v in =4.3v - 2.0 5.0 a ? line regulation v out v in k v out i out =40ma 4.3v ? v in ? 10.0v - 0.2 0.3 ? /v ? input voltage v in 1.8 - 10 v - output voltage temperature characteristics v out topr k v out i out =40ma -40 ? ? topr ? 85 ? - ? 100 - ppm/ ? ? parameter symbol conditions min. typ. max. units circuit output voltage v out(e) ( ? 2) v in =6.0v i out =40ma 4.900 5.000 5.100 v ? maximum output current i outmax v in =6.0v v out(e) ? 4.57v 200 - - ma ? load regulation v out v in =6.0v 1ma ? i out ? 100ma - 30 70 mv ? vdif1 i out =100ma - 160 340 dropout voltage ( ? 3) vdif2 i out =200ma - 400 600 mv ? supply current i ss v in =6.0v - 2.0 6.0 a ? line regulation v out v in k v out i out =40ma 6.0v ? v in ? 10.0v - 0.2 0.3 ? /v ? input voltage v in 1.8 - 10 v - output voltage temperature characteristics v out topr k v out i out =40ma -40 ? ? topr ? 85 ? - ? 100 - ppm/ ? ? note: ? 1: v out(t) = specified output voltage. ? 2: v out(e) = effective output voltage (i.e. the output voltage when ?v out(t) +1.0v? is provided while maintaining a certain i out value). ? 3: vdif = { v in1 (*5) - v out1 (*4) } ? 4: v out1 = a voltage equal to 98% of the output voltage when a stabilized (v out(t) + 1.0v) is input. ? 5: v in1 = the input voltage at the time v out1 is output input voltage has been gradually reduced. xc6201p332 v out(t)= 3.3v ( ? 1) ta = 2 5 ? xc6201p502 v out(t)= 5.0v ( ? 1) ta = 2 5 ? electrical characteristics (continued)
6/24 xc6201 series output voltage c in c l (tantalum) c l (low esr) 1.3v ? 1.6v more than 1.0 f more than 2.2 f 1.7v ? 6.0v more than 1.0 f more than 1.0 f more than 0.1 f typical application circuit with the xc6201 series regulator, in order to ensure the st abilized output voltage, we sug gest that an output capacitor (c l ) of 1 f or more be connected between the output pin (v out ) and the v ss pin. for using low es r capacitor (e.g. ceramic capacitors), please make sure that the out put voltage is more than 1.7v. when the ou tput voltage is from 1.3v to 1.6v, the output capacitor should be a tantalum ca pacitor with a capacitance of 2.2 f. we also suggest an input capacitor (c in ) should be connected between the v in and the v ss in order to stabilize input power source.
7/24 xc6201 series 1. please use this ic within the stated absolute maximum ratings. the ic is liable to malfunction should the ratings be exceeded. when a voltage higher than the v in flows to the v out like when using two power supplies, please connect a schottky barrier diode between the v out and the v in and do not exceed the v out rating. 2. an oscillation may occur by the impedance between a power supply and the input of the ic . where the impedance is 10
or more, please use an input capacitor (c in ) of at least 1 f. in case of high output current, operation can be stabilized by increasing the input capacitor value. also an oscillation may occur if the input capacitor value is smaller than the input impedance when the output capacitance (c l ) is large. in such cases, operations can be stabilized by either increasing the input capacitor value or reducing the output capacitor value. 3. please ensure that output current (i out ) is less than pd / (v in - v out ) and do not exceed the rated power dissipation value (pd) of the package. circuit ? : supply current test circuits circuit ? : output voltage, oscillation, line re gulation, dropout voltage, load regulation ? note on use
8/24 xc6201 series typical performance characteristics (1) output voltage vs. output current
9/24 xc6201 series (2) output voltage vs. input voltage typical performance characteristics ( continued ) xc6201p132 xc6201p132 xc6201p182 xc6201p182 xc6201p272 xc6201p272
10/24 xc6201 series (2) output voltage vs. input voltage (continued) typical performance characteristics (continued) xc6201p332 xc6201p332 xc6201p502 xc6201p502
11/24 xc6201 series (3) dropout voltage vs. output current typical performance characteristics (continued) xc6201p132 xc6201p182 xc6201p272 xc6201p332 xc6201p502
12/24 xc6201 series (4) supply current vs. input voltage typical performance characteristics (continued) xc6201p132 xc6201p132 xc6201p182
13/24 xc6201 series (4) supply current vs. input voltage (continued) typical performance characteristics (continued) xc6201p332
14/24 xc6201 series (5) output voltage vs. ambient temperature typical performance characteristics (continued)
15/24 xc6201 series (6) supply current vs. ambient temperature typical performance characteristics (continued)
16/24 xc6201 series (7) input transient response typical performance characteristics (continued) xc6201p132 xc6201p182 xc6201p272 xc6201p332 xc6201p502 time (1ms/div) time (1ms/div) time (1ms/div) time (1ms/div) time (1ms/div)
17/24 xc6201 series (8) load transient response typical performance characteristics (continued) xc6201p132 xc6201p182 xc6201p272 xc6201p332 xc6201p502 time (2ms/div) time (2ms/div) time (2ms/div) time (2ms/div) time (2ms/div)
18/24 xc6201 series (9) ripple rejection rate (10) output noise density typical performance characteristics (continued) xc6201p132 xc6201p182 xc6201p272 xc6201p332 x c6201p502 xc6201p502 xc6201p302
19/24 xc6201 series packaging information ? sot-25 ? sot-89
20/24 xc6201 series ? usp-6b packaging information (continued) ? to-92
21/24 xc6201 series packaging information (continued) ? usp-6b recommended pattern layout ? usp-6b recommended metal mask design
22/24 xc6201 series mark product series 1 xc6201pxxxxx mark voltage (v) 5 0.1 ~ 3.0 6 3.1 ~ 6.0 mark output voltage (v) mark output voltage (v) 0 3.1 f 1.6 4.6 1 3.2 h 1.7 4.7 2 3.3 k 1.8 4.8 3 3.4 l 1.9 4.9 4 3.5 m 2.0 5.0 5 3.6 n 2.1 5.1 6 3.7 p 2.2 5.2 7 3.8 r 2.3 5.3 8 3.9 s 2.4 5.4 9 4.0 t 2.5 5.5 a 4.1 u 2.6 5.6 b 4.2 v 2.7 5.7 c 1.3 4.3 x 2.8 5.8 d 1.4 4.4 y 2.9 5.9 e 1.5 4.5 z 3.0 6.0 marking rule ? sot-89, sot-25 ? represents the product series ? represents type of regulator ? represents output voltage ? represents assembly lot number 0 to 9, a to z repeated (g, i, j, o, q, w excepted) 123 sot-89 ( top view ) 123 54 sot-25 ( top view )
23/24 xc6201 series mark product series p xc6201pxxxxx t xc6201txxxxx mark ? ? voltage (v) product series 3 3 3.3 xc6201px33xx 5 0 5.0 xc6201px50xx mark detect voltage accuracy product series 1 within ? 1% xc6201pxx1xx 2 within ? 2% xc6201pxx2xx mark production year 3 2003 4 2004 mark ? ? product series 0 1 xc6201xxxxdx mark type product series p 3pin regulator xc6201pxxxdx t v in =7v(rated) xc6201txxxdx mark ? ? voltage (v) product series 3 3 3.3 xc6201x33xdx 5 0 5.0 xc6201x50xdx ? to-92 ? represents type of regulator ? represents least significant digit of production year ?? represents output voltage ? represents detect voltage accuracy ? represents the production lot number 0 to 9, a to z repeated (g, i, j, o, q, w excepted) note: no character inversion used. ? usp-6b ?? represents product series ? represents type of regulator ?? represents output voltage marking rule (continued) usp-6b (top view) ? represents assembly lot number 0 to 9, a to z repeated (g, i, j, o, q, w excepted) note: no character inversion used.
24/24 xc6201 series 1. the products and product specifications cont ained herein are subject to change without notice to improve performance characteristic s. consult us, or our representatives before use, to confirm that the inform ation in this catalog is up to date. 2. we assume no responsibility for any infri ngement of patents, pat ent rights, or other rights arising from the use of any info rmation and circuitry in this catalog. 3. please ensure suitable shipping controls (including fail-safe designs and aging protection) are in force for equipment employing products listed in this catalog. 4. the products in this catalog are not developed, designed, or approved for use with such equipment whose failure of malfunction ca n be reasonably expected to directly endanger the life of, or cause significant injury to, the user. (e.g. atomic energy; aerospace; transpor t; combustion and associated safety equipment thereof.) 5. please use the products listed in this catalog within the specified ranges. should you wish to use the products under conditions exceeding the specifications, please consult us or our representatives. 6. we assume no responsibility for damage or loss due to abnormal use. 7. all rights reserved. no part of this ca talog may be copied or reproduced without the prior permission of torex semiconductor ltd.

▲Up To Search▲

Price & Availability of XC6201132PB

	To Download XC6201132PB Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .